Fuel Line/By-Pass Regulator

Fuel Line/By-Pass Regulator

BOWLING GREEN, KY - Driving your high performance street machine is a blast until you are stuck in bumper-to-bumper traffic. Fuel circulation is critical during low speed driving to keep the fuel from heating up and percolating in the lines before it reaches your carburetor. The fuel delivery experts at Quick Fuel Technology designed this new Fuel Line/By-Pass Regulator combination (#34-4150-BP) that will keep the fuel cool by constantly flowing it through the lines.

The QFT Fuel Line/By-Pass Regulator kit works for most 4150-style carbs and requires a fuel return line. Installing the QFT by-pass regulator helps prevent vapor lock and erratic throttle response during stop-and-go driving. The return line attaches to the bottom of the fuel regulator and should return to the top of the fuel tank. The return line needs to be the same size as the feed line.

At idle, fuel demand is at it lowest, but the fuel pump continues to operate. If you have an electric fuel pump located near the tank, it applies pressure to the entire fuel line, raising the boiling point of the fuel. The line continues to soak up heat and as the fuel reaches the carburetor, it turns into foam and vapor resulting in poor performance. By circulating the fuel back to the tank, the fuel never sits inside the fuel inlet line, where excessive heat can cause fuel delivery problems.

For more information, contact: Quick Fuel Technology, 129 Dishman Lane, Bowling Green, KY 42101. Phone (270) 793-0900. Fax (270) 793-0951. Visit Quick Fuel Technology on the web at: www.quickfueltechnology.com, or email us via our Contact Form.